Amplifier Navigator

Control and Monitor PLD Amplifiers Remotely

Hero Banner of Three QSC Amplifiers. PLD Series, DPA Series, and CXD Series

Amplifier Navigator software enables a user to remotely control and monitor all functions of connected CXD, PLD, or DPA Series amplifiers including the on-board DSP functionality and amplifier configuration.  It also provides a mechanism to create, store, and recall presets and loudspeaker profiles to and from the PC or Mac.

Upload profiles to connected amplifiers, enabling "cloning" for multi-function racks with duplicate amps.  Amplifier Navigator V2.0 provides firmware management - if you connect one or more amplifiers to a computer running Amp Navigator it will update your firmware to the latest release.  Future versions will provide additional functionality.

QSC has tested and qualified two USB extenders using CAT-6 cabling for use when updating amplifier firmware. The two USB extenders are:

  • Icron 1-port USB 2.0 Ranger 2201. Reliable to 300 feet (91.4 Meters).
  • SIIG USB 2.0 4-Port Extender (JU-EX0111-S1). Reliable under 50 feet (15.2 Meters).

Amplifier Navigator Release 2.4.2.1

May 7, 2020

  • New updated Presets voicing for WideLine WL-3082 line array loudspeaker.
  • Update to loudspeaker presets library:  QSC Acoustic Design Series Sub/Sat loudspeakers including AD-S.SAT, AD-S.SUB, AD-P.SAT, AD-P.SUB, AP-C.SAT, AD-C.SUB (CXD/PLD) as well as the new AD-S6 and AD-S402T have been added to the CXD and PLD line.
  • Update to the DPA Series: SC-222, SC-222X, SC-223, SC-223X, SR-800 and SR-1000 have been added.
  • Bug fixes and improvements including improved Mac OSX support.
  • Installation of complete loudspeaker presets library for newly installed, as well as updated version, of Amplifier Navigator software

Windows

  • Windows 7
  • Windows 8
  • Windows 8 Pro
  • Windows 10
    (install in Windows 7 compatibility mode)

Mac

  • OSX Mavericks (10.9)
  • OSX Yosemite (10.10)
  • If a firmware update to an amplifier fails two times, reset the amplifier by unplugging from the power source, restarting Amplifier Navigator, and try again.
  • If the firmware update is successful but the amplifier does not come back online, reset the amplifier by turning the power off then on. The amplifier will come back on with the correct firmware version.

DPA amplifier Preset library files created with 1.3.3 or later need to be renamed to work correctly in Amplifier Navigator. The extension should be changed from “.plf” to “.DPA.plf”. For example, a preset library file called “MyPresets.plf” containing presets from a DPA amplifier should be renamed “MyPresets.DPA.plf”.

Downloads