Products / Loudspeakers / Line Array Systems
WLWX Weatherized WideLine Systems
WideLine-wx models are constructed using premium birch plywood which is full encapsulated in fiberglass. The input connector plate is replaced by a hardwired, captive, UV resistant, outdoor-rated (direct burial) cable with a gland-nut through the cabinet for waterproofing. The cable will be 3 meters in length unless otherwise specified at the time the order is placed. Grilles are stainless steel covered in outdoor rated, vinyl coating and lined with acoustic foam and a fine woven stainless steel mesh.
WideLine WX models are strictly built to order. Please allow 90 days plus shipping time from the time the P.O. is delivered to QSC for delivery.
 |
 |
| WL2102-wx |
WL3082-wx |
 |
| GP218-wx |
|
WL2102-wx
The WL2102-wx is a weather resistant, installation
version of the WideLine-10 WL2102-w line array. All
rigging hardware is removed and replaced with four
female M10 fittings (eight total) mounted to either
end of the enclosure. The loudspeaker is designed
for 3-way operation only and no handles are
provided. An adjustable, external, bolt-on rigging
system for box-to-box connection and adjustment
of splay angles is included.
The AF2102-wx is a compatible, aluminum array
frame for use when suspending the WL2102-wx. Array
frames for the standard WL2102-w are not compatible
with the WL2102-wx.
WL3082-wx
The WL3082-wx is a weather resistant, installation
version of the WideLine-8 WL3082 line array. All
rigging hardware is removed and replaced with four
female M10 fittings (eight total) mounted to either
end of the enclosure. The loudspeaker is designed for
3-way operation only. An adjustable, external, bolt-on
rigging system for box-to-box connection and
adjustment of splay angles is included.
The AF3082-wx is a compatible, aluminum array
frame for use when suspending the WL3082-wx. Array
frames for the standard WL3802 are not compatible
with the WL3082-wx.
GP218-wx
The GP218-wx is a weather resistant, installation
version of the WideLine-10 GP218 subwoofer. The
standard version includes no suspension provisions
but M10 suspension points may be added on request.
| Weatherized WideLine |
| SPECIFICATIONS |
WL2102-wx |
WL3082-wx |
GP218-wx |
| System Type |
Tri-amp line array element |
Tri-amp line array element
|
2 x 18" vented subwoofer |
Transducers
High-frequency
Low-frequency |
3" titanium diaphragm, neodymium magnet
2 x 10" transducer, 3" voice coil, ferrite magnet |
3" titanium diaphragm, neodymium magnet
Dual, 8" woofer, 2.5" voice coil |
-
2 x 18" transducers, 4" voice coil, ceramic magnet |
| Frequency Response (±3 dB) |
55 Hz - 18 kHz |
68 Hz - 18 kHz |
31.4 Hz - 240 Hz
(without processing) |
| Frequency Range (-10 dB) |
48 Hz - 20 kHz |
62 Hz - 20 kHz |
27.4 Hz - 1.2 kHz
(without processing) |
| Continuous Power Capacity1 |
HF: 80 W
LF/MF: 600 W |
HF: 85 W
LF/MF: 250 W
|
LF: 1700 W |
| Peak Output 2 |
HF: 127 dB
LF: 133 dB |
HF: 122 dB
LF: 128 dB |
-
LF: 140.7 dB |
| Nominal Coverage |
H: 140°
V: dependent on number of elements used |
H: 140°
V: dependent on number of elements used |
-
- |
| Input Connectors |
Tinned, bare wire |
Tinned, bare wire |
Tinned, bare wire |
| Suspension / Attachment Points |
Integral rigging system, vertical splay adjustable
in 1° increments from 0°-10° |
Integral rigging system, vertical splay adjustable
in 1° increments from 0°-10° |
None (M10 points available by request) |
| Weight (Net) |
92.5 lb (42 kg) |
61 lb (27.7 kg) |
215 lb (97.5 kg) |
| Dimensions (HWD) |
11.75" x 27.25" x 18.5"
298 mm x 692 mm x 470 mm |
9.5" x 20" x 15.5"
241 mm x 508 mm x 394 mm |
21.13" x 30.13" x 47.32"
537 mm x 765 mm x 1202 mm |
2 Continuous IEC specified test signal, 2 hours bi-amp mode unless otherwise stated.
2 Calculated at 1 m using power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
Specifications subject to change without notice.
LINE ARRAY SYSTEMS
DOCUMENTS
User Manual (PDF-952KB)
RELATED PRODUCTS
WideLine-10 Line Array System
WideLine-8 Line Array System
GP218-sw Subwoofer
WL218-sw WideLine Subwoofer
SC28 System Controller
QSControl.net BASIS
IMPORTANT NOTE:
Signal Processing Requirements
Like most line-array systems available today, QSC WideLine and ILA line-arrays require carefully optimized signal processing in order to perform as intended. QSC has developed processing settings for these loudspeaker systems using our SC28, BASIS and Q-Sys digital processing devices. Arriving at these settings requires skilled engineers, sophisticated measurement equipment and repeated listening in various environments.
It is not possible to simply take the parameters from a QSC processor, transfer them to another processor and get the same results. Other processor manufacturers use different algorithms and design techniques that will produce a different transfer function even if the settings are substantially the same. As a result, QSC is unable to provide settings or tuning support for our line array systems when used with any processors other than those specified by QSC.
