QSC Loudspeaker DSP Voicing Configurations

Located below are a number of signal processing files for use with QSC's DSP products. This data is intended to optimize the performance of QSC loudspeaker products. The files are individually downloadable and in ZIP format.

These files and voicings are subject to change without notice and QSC does not guarantee their performance when used with non-QSC loudspeakers or DSP products.

CSM Series These files are compatible with QSControl.net Venue Manager
CSM Monitor Voicings	These BASIS macros provide the correct voicings for use of the CSM10, CSM12 & CSM15 in monitor mode. CSMXX H1L2 are bi-amp macros. CSMXX fullrange are passive macro voices. Password is "qsc".

AcousticDesign AD-S282H / ISIS I-282H Loudspeaker Signal Processor Settings
AD-S282/ I-282H Biamp (Venue Manager)	Venue Manager file for bi-amplification of AD-S282H or ISIS I-282H. Low shelf filter may be used to adjust bass balance (boost for more bass, cut for vocal/paging applications.)
AD-S282/ I-282H Biamp (Signal Manager)	Signal Manager file for bi-amplification of AD-S282H or ISIS I-282H. Low shelf filter may be used to adjust bass balance (boost for more bass, cut for vocal/paging applications. For DSP-3, DSP-4, DSP-30)

ILA Line Array
Loudspeaker Signal Processor Settings
These files are compatible with QSControl.net Venue Manager

WL115-sw Sub universal

The BASIS macro described in this document is intended for the WL115-sw sub woofer. It is intended to be a ‘universal’ sub macro--it contains user settable equalizer blocks for tailoring the response to the requirements of common array configurations.

WL2082-i Triamp Left/Right

The BASIS macro described in this document is intended for use with tri-amplified ILA line arrays. This macro is intended to be used in a Left/Right configuration. It was created with a 4 box configuration. For different configurations use the contour filter block to adjust.


WideLine-8 Loudspeaker Signal Processor Settings These files are compatible with QSControl.net Venue Manager
WL3082	This Venue Manager macro is intended for use with tri-amplified WL3082 line arrays. It was developed on a 4 box array. The contour EQ block should be used to adjust the frequency response for array configuration and local venue conditions.
WL212-sw	This Venue Manager macro is intended for use with the WL212-sw subwoofer when used in conjuction with WL3082 line arrays.

WideLine-10 Loudspeaker Signal Processor Settings These files are compatible with QSControl.net Venue Manager
WL2102 triamp	This macro file is to be used with any QSControl.net family of signal processors (Basis XXXxx, RAVE XXXxx, DSP XXXxx) to process a WideLine-10 array in tri-amp mode. This new file incorporates Intrinsic Corrective Filtering™ for an average sized array, but will work equally well (with minor HF amplitude adjustment up or down) on bigger or smaller arrays. The file is designed for use with equal gain on all amplifier channels. However, gain adjustments may need to be made for systems utilizing various amplifier types and/or models.
WL2102 biamp	This macro file is to be used with a Basis family signal processor to process a WL2102-X array in bi-amp mode. The file was developed on a 4 box array, but should work with minor system EQ adjustment on most arrays. The file is designed for equal gain on all amplifier channels, gain adjustments should be made for systems with different amplifier channel gain and/or amplifiers in bridged mode. Polar response near 1100 Hz is slightly asymmetric, a tradeoff made to increase beamwidth. Best coverage can be obtained by placing MF drivers to the outside of the listening space.
WL218-sw Sub	This macro file is to be used with a Basis family signal processor to process WL218-SW subwoofers. The file was developed on a single cabinet, but should work with minor system EQ adjustment for most arrays. The file produces -6dB points at 31 and 100 Hz, and produces good summation to a WL2102 array high-passed with a 6th order 80Hz Butterworth or Linkwitz-Riley high-pass filter. The 100Hz acoustic crossover point is achieved with a 60Hz, 8th order Bessel low-pass filter, which has excellent transient characteristics. Within reason, moving the Bessel filter XX Hz up or down will move the acoustic crossover XX Hz up or down (for an 80 Hz crossover, move the Bessel filter down to 40Hz, for 120Hz move it to 80 Hz).

MODULAR DESIGN SERIES VOICINGS These files are compatible with QSC signal processing products DSP-3, DSP-30, and DSP-4.
MD-L115	This file optimizes the response of the MD-L115 low frequency cabinet for use with ModularDesign and AcousticDesign loudspeakers. This configuration low passes the LF Cabinet at 91Hz for proper integration with loudspeakers.
MD-L118	This file optimizes the response of the MD-L118 low frequency cabinet for use with ModularDesign and AcousticDesign loudspeakers. This configuration low passes the LF Cabinet at 97Hz for proper integration with loudspeakers.
MD-F122/64r	This file optimizes the response of the MD-F122/64r loudspeaker in biamp mode.
MD-F122/94r	This file optimizes the response of the MD-F122/94r loudspeaker in biamp mode.
MD-F122/124r	This file optimizes the response of the MD-F122/124r loudspeaker in biamp mode.
MD-F152/64r	This file optimizes the response of the MD-F152/64r loudspeaker in biamp mode.
MD-F152/94r	This file optimizes the response of the MD-F152/94r loudspeaker in biamp mode.
MD-F152/124r	This file optimizes the response of the MD-F152/124r loudspeaker in biamp mode.

ISIS SERIES VOICINGS These files are compatible with QSC signal processing products DSP-3, DSP-30, and DSP-4.
ISIS152M Biamp fullrange V1	This file optimizes the response of the ISIS 152M loudspeaker in biamp mode.
ISIS152M Biamp 100Hz High Pass V1	This file optimizes the response of the ISIS 152M loudspeaker in biamp mode when used in conjunction with the ISIS 215PCM subwoofer. This configuration has a 100Hz high pass filter in it for proper integration with the subwoofer.
ISIS122M Biamp fullrange V1	This file optimizes the response of the ISIS 122M loudspeaker in biamp mode.
ISIS122M Biamp 100Hz High Pass V1	This file optimizes the response of ISIS 122M loudspeaker in biamp mode when used in conjunction with the ISIS 215PCM subwoofer. This configuration has a 100Hz high pass filter in it for proper integration with the subwoofer.
ISIS102M Biamp fullrange V1	This file optimizes the response of ISIS 102M loudspeaker in biamp mode.
ISIS102M Biamp 100Hz High Pass V1	This file optimizes the response of ISIS 102M loudspeaker in biamp mode when used in conjunction with the ISIS 215PCM subwoofer. This configuration has a 100Hz high pass filter in it for proper integration with the subwoofer.
ISIS102W Biamp fullrange V1	This file optimizes the response of ISIS 102W loudspeaker in biamp mode.
ISIS102W Biamp 100Hz High Pass V1	This file optimizes the response of ISIS 102W loudspeaker in biamp mode when used in conjunction with the ISIS 215PCM subwoofer. This configuration has a 100Hz high pass filter in it for proper integration with the subwoofer.
ISIS215PCM 100 Hz Low Pass V2	This file optimizes the response of the ISIS 215PCM subwoofer for use with ISIS loudspeakers. This configuration low passes the subwoofer at 100Hz for proper integration with ISIS loudspeakers.

ACE LOUDSPEAKER VOICINGS These files are compatible with QSC signal processing products DSP-3, DSP-30, and DSP-4.
QSC - ACE1250 Biamp Fullrange V1	This file optimizes the response of the ACE 1250 for biamp, full range operation.
QSC - ACE1250 Biamp 100Hz High Pass V1	This file optimizes the ACE 1250 for biamp operation with the ISIS 215PCM subwoofer. This configuration has a 100Hz high pass filter in it for proper integration with the subwoofer.
QSC - ACE1160 Biamp Fullrange v1	This file optimizes the ACE 1160AWR for biamp, full range operation. (Note: this speaker has no internal passive crossover)
QSC - ACE1160 Active 100Hz High Pass V1	This file optimizes the ACE 1160AWR for biamp operation with the ISIS 215PCM subwoofer. This configuration has a 100Hz high pass filter in it for proper integration with the subwoofer.

OTHER ACE LOUDSPEAKER VOICINGS These files are compatible with QSC signal processing products DSP-3, DSP-30, and DSP-4.
QSC - ACE550 Passive Fullrange V1	This file corrects and flattens the response of the ACE 550 5.25" two-way loudspeaker.

TOP