QSC Audio Products - Passionate About SoundQSC Audio Home Page  
 

Powerlight 6.0 II

Legacy Models:
1.0  |  1.0HV  |  1.4  |  1.5x  |  1.6HVx  |  1.8  | 2.0HV  |  2.4MB  |  6.0PFC |  9.0PFC

Current Production Models:  3.4  |  3.8  |  4.0  |  6.0 II



With an unequaled reputation for sound quality and reliability, the PowerLight® Series is a range of advanced-technology professional audio amplifiers designed for touring professionals. PowerLights feature QSC's exclusive PowerLight technology for extraordinary audio performance, reliability and reduced weight. With a range of powers all the way up to 4,500 watts per channel, and two model sdesigned for bi-amp use, you can choose the right power for your special application.

With PowerLight® technology, PowerLight amplifiers take your sound to a whole new level. Not only does it give you tighter bass and clean transparent highs, PowerLight also cuts waste heat and boosts reliability. PowerLight is a revolutionary switching power supply technology that provides ample current to the audio power circuitry by charging the supply rails 230,000 times a second though an ultra-low impedance circuit. So unlike amplifiers that use conventional supplies, the audio signal is never starved prematurely and remains crisp and clean.

PowerLight Series amplifiers also boast a set of useful features. Individually selectable clip limiters lower distortion and protect speakers, and a standby mode allows remote AC control.

FEATURES

  • PowerLight switching technology - for improved audio performance
  • High efficiency, Class H linear output circuit lowers AC current consumption and cooling requirements by 40% or more (on selected models)
  • DataPort for remote computer control
  • User defeatable clip limiter reduces distortion, protects speakers
  • Advanced thermal management system for superior cooling
  • Detented gain controls with 2 dB steps for easy resetting
  • Comprehensive LED status arrays
  • Variable speed fan for quiet operation
  • Remote AC power control
  • DC, subsonic audio, and thermal overload protection
  • Neutrik "Combo" (XLR & 1/4") and barrier balanced input connectors
  • 3 year warranty plus optional 3 year extended service contract



POWERLIGHT SERIES

  • Legacy Models:
  •   Powerlight 1.0
  •   Powerlight 1.0HV
  •   Powerlight 1.4
  •   Powerlight 1.5x
  •   Powerlight 1.6HVx
  •   Powerlight 1.8
  •   Powerlight 2.0HV
  •   Powerlight 2.4MB
  •   Powerlight 6.0PFC
  •   Powerlight 9.0PFC
  • Current Production Models:
  •   Powerlight 3.4
  •   Powerlight 3.8
  •   Powerlight 4.0
  •   Powerlight 6.0 II

DOCUMENTS

Legacy PowerLight Users Manual (PDF 1.5MB)
PL 6.0 & 9.0 PFC Users Manual (PDF 998K)
PL 1.0 Specifications (PDF 76K)
PL 1.0HV Specifications (PDF 176K)
PL 1.4 Specifications (PDF 74K)
PL 1.5x Specifications (PDF 16K)
PL 1.6HVx Specifications (PDF 16K)
PL 1.8 Specifications (PDF 79K)
PL 2.0HV Specifications (PDF 60K)
PL 2.4MB Specifications (PDF 15K)
PL 9.0PFC Specifications (PDF 18K)
Powerlight Service Manual
PL 6.0 & 9.0 PFC Service Manual

SCHEMATICS

PowerLight 1.0 (ZIP 1.67MB)
PowerLight 1.4 (ZIP 1.9MB)
PowerLight 1.8 (ZIP 1.89MB)
PowerLight 2.0 (ZIP 1.96MB)
PowerLight 2.4 (ZIP 663K)
PowerLight 6.0 PFC (ZIP 1.6MB)
PowerLight 9.0 PFC (ZIP 1.75MB)


Get Acrobat Reader
 
SPECIFICATIONS PL 1.0 PL 1.0HV PL 1.4 PL 1.5x
    Channel 1 Channel 2
  STEREO MODE (both channels driven)
8 ohms
  FTC 20 Hz-20 kHz, 0.1% THD
  EIA 1 kHz, 1% THD
200 W
210 W
300 W
325 W
300 W
325 W
450 W
475 W
200 W
210 W
4 ohms
  FTC 20 Hz-20 kHz, 0.1% THD
  EIA 1 kHz, 1% THD
325 W
350 W
500 W
525 W
500 W
525 W
700 W
750 W
325 W
350 W
2 ohms EIA 1 kHz, 1% THD 500 W - 700 W 1000 W 500 W
  BRIDGED MONO MODE
16 ohms 20 Hz-20 kHz, 0.1% THD - 600 W - - -
8 ohms 20 Hz-20 kHz, 0.1% THD 650 W 1000 W 1000 W - -
4 ohms 1 kHz, 1% THD 1000 W - 1400 W - -
Input Sensitivity @ 8 ohms 1.0 Vrms
(+2.2 dBu) 		1.0 Vrms
(+2.2 dBu) 		0.96 Vrms
(+1.9 dBu) 		1.23 Vrms
(+4.0 dBu) 		1.0 Vrms
(+2.2 dBu)
Voltage Gain 40x (32 dB) 49x (34 dB) 49x (34 dB) 49x (34 dB) 40x (32 dB)
Output Circuitry AB AB H (2-Step) H (2-Step) AB
120v Current Consumption (1/8 Power Pink Noise @ 4 ohms) Multiply current by 0.5 for 230V units 3.5A 5.1A 3.7A 3.6A
  ALL MODELS
Dynamic Headroom 3 dB @ 4 ohms
Distortion (SMPTE-IM) less than 0.05%
Frequency Response 20 Hz-20 kHz, ± 0.15 dB
-3 dB points: 8 Hz and 100 Hz
Damping Factor greater than 350 @ 8 ohms
Noise (unweighted) 108 dB below rated output (20 Hz - 20 kHz)
Connectors (each channel)
Input: Neutrik "Combo" XLR + 1/4" TRS input and Barrier strip
Output: "Touch-proof" binding posts
Input Impedance
10k ohms unbalanced, 20k ohms balanced
Amplifier Protection
Full short circuit, open circuit, thermal, ultrasonic and RF protection.
Stable into reactive or mismatched loads.
Controls
Front: AC switch, Ch 1 & Ch 2 gain knobs, Ch. 1 and Ch.2 clip limiter switches
Rear: Parallel/Stereo/Bridge switch (except PL 1.5x), Remote power supply control
Load Protection
On/off muting, DC-fault power supply shutdown, clip limiting
Indicators
PROT: Red LED
STANDBY: Yellow LED
PWR-ON: Green LED
CLIP: Red LED (each channel)
LEVEL-10 dB: Yellow LED (each channel)
LEVEL-20: Yellow LED (each channel)
SIGNAL: Green LED (each channel)
Power Requirements
120, 230 VAC, 50-60 Hz
Cooling Continuously variable spped fan, tunnel heatsink, back-to-front air flow
Dimensions
19.0" (48.3 cm) rack mounting (all models)
3.5" (8.9 cm) tall (2RU)
17.9" (45.5 cm) deep behind front mounting rails
Weight 17.4 lbs (8 kg) net

SPECIFICATIONS PL 1.6HVx PL 1.8 PL 2.0HV PL 2.4MB
  Channel 1 Channel 2      
  STEREO MODE (both channels driven)
8 ohms
  FTC 20 Hz-20 kHz, 0.1% THD
  EIA 1 kHz, 1% THD
725 W
775 W
275 W
300 W
400 W
450 W
650 W
725 W
1000 W
1050 W
4 ohms
  FTC 20 Hz-20 kHz, 0.1% THD
  EIA 1 kHz, 1% THD
1100 W
1200 W
450 W
475 W
650 W
700 W
N/A
1000 W
1550 W
1700 W
2 ohms EIA 1 kHz, 1% THD - - 900 W - 2400 W
  BRIDGED MONO MODE
16 ohms 20 Hz-20 kHz, 0.1% THD          
8 ohms 20 Hz-20 kHz, 0.1% THD - - 1300 W 2000 W -
4 ohms EIA 1 kHz, 1% THD - - 1800 W - -
Input Sensitivity @ 8 ohms (in Vrms) 1.23 Vrms
(+4.0 dBu)		 1.0 Vrms
(+2.2 dBu) 		1.14 Vrms
(+3.4 dBu) 		1.16 Vrms
(+3.5 dBu) 		1.14 Vrms
(+3.4 dBu)
Voltage Gain 62x (36 dB) 49x (34 dB) 49x (34 dB) 62x (36 dB) 78x (38 dB)
Output Circuitry H (2-Step) AB H (2-Step) H (2-Step) H (3-Step)
120v Current Consumption (1/8 Power Pink Noise @ 4 ohms) Multiply current by 0.5 for 230V units 8.5A 7.3A 9.6A 6.9A
  ALL MODELS
Dynamic Headroom 3 dB @ 4 ohms
Distortion (SMPTE-IM) less than 0.05%
Frequency Response 20 Hz-20 kHz, ± 0.15 dB
-3 dB points: 8 Hz and 100 Hz
Damping Factor greater than 350 @ 8 ohms greater than 500
@ 8 ohms
Noise (unweighted) 108 dB below rated output (20 Hz - 20 kHz)
Connectors (each channel)
Input: Neutrik "Combo" XLR + 1/4" TRS input and Barrier strip
Output: "Touch-proof" binding posts
Input Impedance
10k ohms unbalanced, 20k ohms balanced
Amplifier Protection
Full short circuit, open circuit, thermal, ultrasonic and RF protection.
Stable into reactive or mismatched loads.
Controls
Front: AC switch, Ch 1 & Ch 2 gain knobs (except PL 2.4MB), Ch. 1 and Ch.2 clip limiter switches
Rear: Parallel/Stereo/Bridge switch (except PL 1.6HVx and PL 2.4MB), Remote power supply control terminal strip
Load Protection
On/off muting, DC-fault power supply shutdown, clip limiting
Indicators
PROT: Red LED
STANDBY: Yellow LED
PWR-ON: Green LED
CLIP: Red LED (each channel)
LEVEL-10 dB: Yellow LED (each channel)
LEVEL-20: Yellow LED (each channel)
SIGNAL: Green LED (each channel)
Power Requirements
120, 230 VAC, 50-60 Hz
Cooling Continuously variable spped fan, tunnel heatsink, back-to-front air flow
Dimensions
19.0" (48.3 cm) rack mounting (all models)
3.5" (8.9 cm) tall (2RU)
17.9" (45.5 cm) deep behind front mounting rails
Weight 17.4 lbs (8 kg) net

SPECIFICATIONS PL 6.0PFC PL 9.0PFC
  STEREO MODE (both channels driven)
8 ohms
  20 Hz-20 kHz, 0.1% THD
  20 Hz-20 kHz, 0.2% THD
  EIA 1 kHz, 1% THD
1400 W
-
1600 W
-
1800 W
1950 W
4 ohms
  20 Hz-20 kHz, 0.1% THD
  20 Hz-20 kHz, 0.2% THD
  EIA 1 kHz, 1% THD
2500 W
-
2800 W
-
3200 W
3400 W
2 ohms EIA 1 kHz, 1% THD 3500 W 4500 W
  BRIDGED MONO MODE
16 ohms 1 kHz, 1% THD 3200 W 3900 W
8 ohms 1 kHz, 1% THD 5600 W 6800 W
4 ohms 1 kHz, 1% THD 7000 W 9000 W
Distortion (8, 4 & 2 ohms @ 10 dB below rated power) < 0.06% THD < 0.15% THD
Input Sensitivity
  rated power @ 8 ohms:
  rated power @ 4 ohms:
2.6 Vrms (+10.6 dBu)
2.5 Vrms (+10.2 dBu)
3.0 Vrms (+11.8 dBu)
2.8 Vrms (+11.2)
Voltage Gain 40x (32 dB) 40x (32 dB)
120v Current Consumption (1/8 Power Pink Noise @ 4 ohms) Multiply current by 0.5 for 230V units 16A 19A
  ALL MODELS
Output Circuitry Quasi-complementary MOSFET output with multi-step high efficiency circuit
Dynamic Headroom 0.77 dB @ 4 ohms
Distortion (SMPTE-IM) less than 0.02%
Frequency Response
(at 10 dB below rated output power) 		20 Hz-20 kHz, ± 0.15 dB
2 Hz - 50 kHz, +0/-3 dB
Damping Factor greater than 2000 (1 kHz and below)
Noise (unweighted) 107 dB below rated output (20 Hz - 20 kHz)
Connectors (each channel)
Input: Neutrik "Combo" XLR + 1/4" TRS input and Barrier strip
Output: "Touch-proof" binding posts, 60A rated Neutrik Speakon (1 per channel)
Input Impedance
10k ohms unbalanced, 20k ohms balanced
Amplifier Protection
Full short circuit, open circuit, thermal, ultrasonic and RF protection.
Stable into reactive or mismatched loads.
Controls
Front: AC switch, Ch 1 & Ch 2 gain knobs, Ch. 1 and Ch.2 clip limiter switches
Rear: Parallel/Stereo/Bridge switch, Remote power supply control terminal strip
Load Protection
On/off muting, DC-fault power supply shutdown
Indicators
PROT: Red LED
STANDBY: Yellow LED
PWR-ON: Green LED
CLIP: Red LED (each channel)
LEVEL-10 dB: Yellow LED (each channel)
LEVEL-20: Yellow LED (each channel)
SIGNAL: Green LED (each channel)
Power Requirements
100, 120, 220-240 VAC, 50-60 Hz
Cooling Four continuously variable speed fans, back-to-front air flow
Dimensions
19.0" (48.3 cm) rack mounting (all models)
5.25" (13.3 cm) tall (3RU)
17.9" (45.5 cm) deep behind front mounting rails
Weight 69 lbs (31.4 kg) net


All Specification Subject to Change Without Notice.

PowerLight is a registered trademark of QSC Audio Products, Inc.

TOP




QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners. Patents may apply or be pending.