 |
WideLine-10 Large Array Frame (AF-2102-LA)
For rigging of WideLine-10 Line Array. This heavy-duty aluminum fly grid can support up 1,423 pounds (646.8 kg) flown (with a 7:1 strength rating) or up to 8 stacked enclosures. Also available in white. (AF-2102-LA-WHT) |
 |
WideLine-10 Small Array Frame (STACKING GRID)
For rigging of WideLine-10 Line Array. The small frame will easily handle four enclosures and will interface with the QSC 215PCM or 215SB subwoofer in both a stacked or flown configuration. |
 |
WideLine-10 8 Pack Rack (WL-8-PACK-RACK)
The ultimate touring accessory for WideLine-10. This padded rack holds 8 WL2102 loudspeakers and a large fly grid.
|
 |
WideLine-10 3-Box Road Case (WL-Case)
This padded transport/storage case holds three WideLine-10 WL2102 loudspeakers and a small stacking grid.
|
 |
WideLine-8 Large Array Frame (AF3082-L)
Large array frame, supports up to twelve (12) WideLine-8 elements and four (4) WideLine-8 subs with 10:1 design factor. Available in black or white
|
 |
WideLine-8 Small Array Frame (AF3082-S)
Small array frame, supports up to twelve (12) WideLine-8 elements with 10:1 design factor. Available in black or white |
 |
WideLine-8 Extension Bar (EB3082)
Extension bar, required for system with the subwoofers flown behind the main array. Available in black or white
|
 |
WideLine-8 Pullback Bar (PB3082)
Available in black or white
|
 |
WideLine-8 Adapter Frame for WideLine-10 Arrays (AF8-10)
Adapter frame that allows suspension of WL3082 under WL2012 |
 |
WideLine-8 Caster Pallet (CP3082-4)
Wood caster pallet for four (4) WL3082 line array elements, includes padded cover |
 |
WL212-sw / GP212-sw Caster Pallet and Cover (CP212-2)
One wood caster pallet (dolly) for transporting two WL212-sw or GP212-sw sub-woofer enclosures - INCLUDES ONE SOFT COVER 27.5” TALL to fit a two-unit tall stack. (FG-000358-01 plus FG-000361-00) |
 |
WL218-sw Subwoofer Array Frame (AF218-sw)
Aluminum array frame for stacking 4 or flying 8 WL218-sw. Available in black or white
|
 |
WL218-sw Cover (CVR218)
Padded transport cover for WL218-sw
|
 |
GP218-sw Wood caster pallet without cover (CP218-0)
GP218-sw Wood caster pallet plus soft cover (CP218-1)
GP218-sw Soft Cover (CVR-GP218)
Note: New caster pallets (post Sep. 2008) are made of wood. These were previously metal. |
 |
HPR Series Loudspeaker Covers
Protect your HPR loudspeakers during transit or storage with these soft covers. The loudspeaker's side handles are easily accessible and each cover features a closable pocket to store your cables.
Buy online from QSC:
HPR COVER 122 (FG-000132-00)
HPR COVER 152 (FG-000219-00)
HPR COVER 153 (FG-000220-00)
HPR COVER 151 (FG-000221-00)
HPR COVER 181 (FG-000222-00) |
 |
HPR Series Speaker Pole (26") (P/N: HPR POLE 26)
For mounting HPR152i loudspeakers atop a HPR151i or HPR181i subwoofer. Pole is 35mm dia. and 26" (660mm) long.
Buy online from QSC:
HPR POLE 26 (FG-000218-00) |
 |
HPR Series Speaker Pole (31") (P/N: HPR POLE 31)
For mounting HPR122i loudspeakers atop a HPR151i or HPR181i subwoofer. Pole is 35mm dia. and 31" (787mm) long.
Buy online from QSC:
HPR POLE 31 (FG-000131-00) |
 |
HPR M10 Hardware Kit (P/N: HPR M10 KIT)
M10 forged-shoulder, steel eyebolt kit for suspending HPR122i, HPR152i or HPR153i
User Manual (PDF 527K)
Buy online from QSC:
HPR M10 KIT (FG-000255-00) |
 |
HPR Horizontal Suspension Kit (P/N: HPR SUS KIT 122)
M10 forged-shoulder, steel eyebolt kit with solid aluminum pull-back bar for horizontal suspension of HPR122i
User Manual (PDF 1MB)
Buy online from QSC:
HPR SUS KIT 122 (FG-000256-00) |
 |
HPR122i Yoke Bracket (P/N: HPR YOKE 122)
This steel yoke bracket is designed to mount the HPR122i vertically from a variety of structures while allowing tilt rotation. It is compatible with several different attachment methods and can be fitted with a third party speaker pole.
User Manual (PDF 1.7 MB)
Buy online from QSC:
HPR YOKE 122 (FG-000133-00) |
 |
K Series Totes and Covers (Part numbers: K8 TOTE, K10 TOTE, K12 TOTE, KSUB COVER)
Protect your investment with these soft, padded totes. The KSub Cover comes with a
grille guard.
Buy online from QSC:
K8 Tote (FG-000373-00)
K10 Tote (FG-000374-00)
K12 Tote (FG-000375-00)
KSub Cover (FG-000376-00) |
 |
K Series M10 Hardware Kit (P/N: K SERIES M10 KIT)
M10 forged-shoulder, steel eyebolt kit for suspending K8, K10 or K12
Buy online from QSC:
K Series M10 Kit (FG-000389-00) |
 |
K Series Yoke Mount Kits (Part numbers: K8 YOKE, K10 YOKE, K12 YOKE)
These powder-coated steel yoke brackets are used to mount a K Series loudspeaker horizontally or vertically. All the hardware and spacers to securely attach the mount to the loudspeaker are included.
User Manuals (PDF): K8 YOKE, K10 YOKE, K12 YOKE |
 |
K Series Pole Extension
16 inch (40.6 cm) extension pole for use with K Series speaker pole and K8 or K10 loudspeaker. Not intended for any other K Series or KW Series loudspeaker. Powder-coated steel, black.
Buy online from QSC:
K Series Pole Extension (FG-000439-00) |
 |
ILA Installation Line Array
FB2082-i Array Frame
The FB2082-i array frame supports most flown array applications. Available in black or white.
Shackle holes accept 3/4" (20 mm) screw pin anchor shackles
|
 |
ILA Installation Line Array
GS115-sw Ground Stack Kit
Ground stacking is easily accomplished using the GS115-sw Ground Stack Kit. The kit includes two ground stack rails which attach to the rigging straps under the WL115-sw. These rails provide added stability and allow for ground stacked arrays to be constructed.
|
 |
ILA Installation Line Array
EB2082-i Extension Bar
The EB2082-i extension bar supports suspension where the center of gravity is beyond the limits of the FB2082-i. Additionally, the EB2082-i is used for arrays where subwoofers are flown behind the main array. Available in black or white. Shackle holes accept 3/4" (20 mm) screw pin anchor shackles
|
 |
ILA Installation Line Array
PB2082-i Pull-back Bar
The PB2082-i pull-back bar is used for pulling back the bottom element of the array for aiming and stability or as the primary suspension component for certain small arrays. Available in black or white. Shackle hole accepts 5/8" (16 mm) screw pin anchor shackle
|
 |
ILA Installation Line Array
QRP-KIT-1 Quick Release Pins
Kit of four (4) Quick Release Pins for use in lieu of included bolts. |
 |
ID-8 and ID-8T IntelliDock™ Mounts (P/N: AD-ID8 & AD-ID8T)
For mounting AD-S82 & AD-S82H Loudspeakers. This mount features a quick-connect/disconnect latch which provides electrical connections and a highly-adjustable balltype mount. This mount allows for all mounts and wiring to be fully installed and the loudspeakers to be placed at the last possible moment. The ID-8T is identical to the ID-8, but equipped with an audio matching transformer with 70V and 100V distributed audio input capability. Available in black or white.
Buy online from QSC:
AD-ID8 (black) (FG-000114-01)
AD-ID8-WH (white) (FG-000114-02)
AD-ID8T (black) (FG-000114-03)
AD-ID8T-WH (white) (FG-000114-04) |
 |
YM-8 and YM-8T Yoke Mounts (P/N: AD-YM8 & AD-YM8T)
For mounting AD-S82 & AD-S82H Loudspeakers. The YM-8 and YM-8T yoke mounts provide for mounting on most
any surface and are adjustable on one axis. The YM-8T yoke mount’s cover plate is equipped with an audio matching transformer with 70V and 100V distributed audio input capability. Available in black or white.
|
 |
YM-5 Yoke Mount (P/N: AD-YM5)
For mounting AD-S52 & AD-S52T Loudspeakers. The YM-5 yoke mount provides for mounting on most any surface and are adjustable on one axis. Available in black or white.
Buy online from QSC:
AD-YM5 (black) (FG-000113-01)
AD-YM5-WH (white) (FG-000113-02) |
 |
I-YM8 Multi-purpose yoke mount/ floor monitor hardware (P/N: I-YM8)
For mounting ISIS I-82H Loudspeakers. I-YM8 Accessory Kit provides a yoke mount suitable
for pole mounting and a pair of swivel extension feet for use as floor or stage monitors. The included pole cup or mic stand adapter can be attached to the yoke mount using the included knob as well as standard truss clamps for additional mounting options.
Buy Online from QSC:
I-YM8 (FG-000121-01) |
 |
AcousticDesign Ceiling Series Installation Brackets
Mud ring bracket for installation of AD-CI522T in sheetrock or plaster (ADC-MR)
New construction bracket for installation of AD-CI52T in sheetrock or other solid surfaces (ADC-NC))
Shallow version mud ring bracket for installation of AD-CI522ST in sheetrock or plaster (ADC-MRS)
Shallow version new construction bracket for installation of AD-CI52ST in sheetrock or other solid surfaces (ADC-NCS)
Mud ring bracket for installation of AD-C42T in sheetrock or plaster (AD-MR4)
New construction bracket for installation of AD-C42T in sheetrock or other solid surfaces (AD-NC4) |
 |
K8/K10/K12 Outdoor Cover
Nylon fabric and mesh cover for temporary outdoor use of K8 (K10, K12) in adverse weather. Removable amplifier panel allows access to connectors and controls. Vented panel maintains airflow for proper heat management. Not intended for permanent outdoor installation or sustained severe weather conditions
|
